In the production and processing process of the factory, in order to make the clothes achieve certain special effects or design requirements, some processing will be carried out after the garments are finished, among which the washing process is very common. During the washing process, some force generated inside the washing machine will cause the zipper to be forcibly opened, and under the influence of external force pulling, etc., the chain teeth will be damaged or fall off. So let’s take a look at how to avoid damage to laundry zippers?
Cause of damage: When the zipper is not fully closed before cleaning, the teeth inside the slider are pulled by the slider when external force is applied during the cleaning process. When external forces exceed what they can withstand, teeth can fall out or become in place.
At this time, the slider will also fall off due to the gap caused by the falling off or displacement of the chain teeth. Friends who do these processing can notice that when we want to do laundry, we must close the zipper completely, pull the slider to the top and fix it.
In addition, in order to achieve the effect of whitening the clothes, solids such as pumice are put into the washing machine. These small stones roll back and forth during the washing process. They are hard solids and will scratch the parts of the zipper or The surface treatment layer makes the parts show the color of the base, so at this time, wrap the slider with cotton cloth and sew it on the cloth or cloth to fix it.
Therefore, when we usually wash clothes, try to pull the zipper up and close it, or wrap the slider and the tail of the zipper with cotton cloth when washing clothes. Therefore, during the washing process, the slider will not be in direct contact with the inner wall of the machine, and will not continue to collide, and the life of the slider will be much longer than if it is not fixed. After wrapping the bottom of the zipper, the bolt or the box will not enter some parts of the inside of the washing machine, and then there will be no zipper phenomenon, and the cloth tape will not be easily separated from the bolt rod.
